Painting Buildings with Plastic Paint

How to Paint Buildings with Plastic Paint. Painting a room is one of the easiest and most cost-effective ways to refresh or completely change its appearance. Interior painting can be a simple and affordable project, but proper preparation of your surfaces is essential. If you want a professional result, paying attention to priming is crucial. Painting without priming can lead to an uneven finish and cracks.

When it comes to painting, following a few simple strategies can help ensure your wall looks as smooth as possible. In this guide, we’ll teach you how to paint buildings with plastic paint so you can learn the best methods for “painting your walls“.

 

Simple Building Painting

Simplicity in painting doesn’t mean it’s not valuable. On the contrary, it often reflects a minimalist style, especially in the modern world. That’s why plastic paint is considered the best option for simple building painting.

By plastic paint, we mean the type that can be washed, as seen in developed countries.

 

Plastic Paint

Plastic paints give walls a matte finish and texture, making them look elegant. This type of paint is not washable, but it is much cheaper than oil and acrylic paints. As a result, using plastic paint can reduce your overall costs.

However, we recommend using plastic paint for ceilings. Essentially, non-washable plastic paint is best used in low-traffic areas that are less likely to get dirty.

Plastic Paint Formulation

 

Definition of Emulsion or Latex Paint

Building painting with plastic paint, including commonly used and widely consumed paints in building painting.

Types of plastic paints, also known as emulsions or latex, are.

Emulsion or latex can be defined as follows: An emulsion consists of two liquids that do not mix with each other.

All liquids are divided into two categories:

Including liquids with water-based combinations and liquids with oil-based combinations.

Certainly, this classification is not entirely accurate and fundamental. But in most cases, it is correct.

In the emulsion combination, tiny droplets present in one liquid like oil in another liquid like water

Without mixing with each other, they remain scattered apart.

 

Residential Painting and Commercial Painting with Plastic Paint

Plastic paint is generally divided into two types:

1- Completely plastic

2- Semi-plastic

Which are available in stores and specialized shops selling building paints.

You may have encountered situations where, due to excessive advertising by companies and factories, you purchased paints that are advertised as completely washable. However, you might have experienced that these plastic paints are not completely washable. Since washability is a significant advantage in building painting, there is a high demand for it.

As mentioned in the articles about oil-based painting, only oil-based and acrylic paints benefit from this feature.

It’s important to know that only quality and standard plastic paints have some resistance to water but are not washable.

Unlike oil-based paints, plastic paints do not have an offensive odor and are not dizzying.

They also have a high execution speed, dry quickly, and have a special beauty.

One of the best advantages of plastic paints compared to oil-based paints is their ability to withstand moisture and warm air, making them very suitable for bathroom and toilet ceilings.

All these advantages have made plastic paints more popular than other types of paints.

If you are thinking about repainting your home a few years after painting it, plastic paint is more cost-effective for you because a few years after applying plastic paint, homeowners can repaint their homes with less cost and time compared to oil-based paint.

Learning How to Paint with Plastic Paint

Do you need training to use plastic paint? Yes, just like other types of building paints, plastic paint requires training to apply it correctly. Learning how to paint with plastic paint starts with knowing how to mix it with water. You need to understand how much water is needed for the mixture.

First, you should consider a mixing ratio of 60% paint to 40% water. That means filling 60% of your paint tray with plastic paint and 40% with water. Then, you can mix the water and paint. For example, for one kilogram of plastic paint, you need 400 grams of water.

The second part of learning to paint with plastic paint is understanding the drying time. While most people know that building paints can be applied with brushes, rollers, and spray guns, they might not know how long it takes for plastic paint to dry. When should the second coat be applied? How many coats are needed?

Plastic paint dries in about one hour. After this time, you can apply the second coat. Due to its low coverage, plastic paint typically needs 3 to 4 coats. If the base paint is oil-based, sand the wall first and then apply 3 to 4 coats of plastic paint.

How to Paint Walls with Plastic Paint

How do you use plastic paint on walls? Follow these steps for a proper application:

1. Smooth the surface with sandpaper before applying primer.
2. Apply the primer and let it dry for 24 hours.
3. Mix the necessary amount of water into the plastic paint and apply it with a brush, spray gun, or roller.
4. Remember that the water in the paint will evaporate when applied to the wall or surface.
5. Ensure you apply the paint evenly with the brush, roller, or spray gun.

 

Steps for Painting Buildings with Plastic Paint

Next, we’ll guide you through the steps of painting buildings with plastic paint, simplifying the painting process.

 

Preparing Environment, Tools, and Paints

Cover surfaces and furniture: Start by moving household items away from walls and covering them. Also, cover the floor with cloth or plastic to protect it, and place all paints and “painting tools” on it to prevent damage.

Apply painter’s tape: If you’re new to painting, straight lines can be challenging. Use painter’s tape along all edges to help maintain precision.

Mix your paint: Before starting, ensure all paints are thoroughly mixed to achieve uniform color. Avoid shaking paint cans vigorously to prevent dried paint from mixing into the fresh batch.

Prepare your walls: A smooth, flawless surface greatly enhances your work’s quality. Remove surface imperfections using putty and sandpaper, then dust off for a better final result.

 

Priming

The priming step in the process of painting buildings with “plastic paint” is crucial as it forms the foundation of your work. Please perform this step carefully: start by masking off edges with a braush and good primer. Then, begin rolling with a roller soaked in primer, creating a large (W) shape on the wall and covering it evenly and smoothly with systematic strokes. Continue this process until your entire wall is primed. Allow at least one day for the primer to dry completely.

 

Painting

The entire painting process is similar to priming and doesn’t differ much. Start by painting the edges with a brush, then use a roller to apply paint in a (W) pattern across the entire surface. Lastly, allow time for the paint to dry, resulting in the color you desired for your walls.

 

Advantages and Disadvantages of Plastic Paint

Advantages:

1. These paints use fewer toxic chemicals, making them odorless.
2. They are the preferred choice for painters due to their ease of use.
3. Plastic paints are suitable for all surfaces, including wood, glass, and concrete.
4. They result in a smoother and glossier finish compared to other types of paint.
5. Bright shades of these paints have strong sunlight reflection capabilities.
6. They can be easily cleaned with a soft cloth.
7. They resist streaking even under direct sunlight.